BLENDER: Creating Jeep Gladiator Rubicon from A to Z

Course Curriculum

Chapter 1: Introduction

Lecture 1: Introduction

Lecture 2: Before you start

Chapter 2: Modeling

Lecture 1: 003_Adding The Reference Images

Lecture 2: 004_Creating the Grilles with the head lights

Lecture 3: 005_Adding the inner rims of the grilles and the pattern

Lecture 4: 006_Creating the headlight details part 1

Lecture 5: 007_Creating the headlight details part 2

Lecture 6: 008_Completing the headlight and starting with the fender

Lecture 7: 009_Creating the fender base

Lecture 8: 010_Modeling the Hood

Lecture 9: 011_Modeling the Hood part 2

Lecture 10: 012_Fixing some issues with the Hood

Lecture 11: 013_Modeling the Hood Vents

Lecture 12: 014_Starting with the front Bumper

Lecture 13: 015_Starting with the front Bumper part 2

Lecture 14: 016_Optional video to watch ( fixing some issues with the Bumper )

Lecture 15: 017_Creating the Bumber lights cover

Lecture 16: 018_Creating the bumper front cover and give it a thickness

Lecture 17: 019_Bending the bumper and creating the Hook

Lecture 18: 020_Creating a cover behind the bumper

Lecture 19: 021_Creating the bumper's bottom cover

Lecture 20: 022_Starting with the fender

Lecture 21: 023_Creating the Fender cover

Lecture 22: 024_Adding details for the Fender cover

Lecture 23: 025_Using Shrinkwrap modifier to fix the fender's shading issue

Lecture 24: 026_Finishing the Fender frame

Lecture 25: 027_Starting with Fender front light

Lecture 26: 028_Finishing the back buckets of the light

Lecture 27: 029_Creating the reflector light

Lecture 28: 030_Creating fender vents

Lecture 29: 031_Creating the fender vents pattern

Lecture 30: 032_Making some tweaks for the fender

Lecture 31: 033_Starting with the top area of the Fender

Lecture 32: 034_Creating the windshield base panel

Lecture 33: 035_Creating the wiper base panel

Lecture 34: 036_Creating the Wiper base hatch

Lecture 35: 037_Modeling the wiper panel

Lecture 36: 038_Modeling the wiper panel part 2

Lecture 37: 039_Finishing the modeling of the wipers panel

Lecture 38: 040_Creating pattern for the wipers panel

Lecture 39: 041_Creating the Hood Hinge

Lecture 40: 042_Shrinkwrap the Hood hinge on the hood and creating the head screw

Lecture 41: 043_Creating the windshield hold down rubber

Lecture 42: 044_Starting with the Hood Latch part 1

Lecture 43: 045_Finishing the Hood Latch

Lecture 44: 046_making some changes for the Hood and the Hood latch

Lecture 45: 047_Putting the Hood Latch in place and use Data Transfer to fix the shading pro

Lecture 46: 048_Starting with the windshield

Lecture 47: 049_Completing the frame and creating the windshield glass

Lecture 48: 050_Creating the doors panel

Lecture 49: 051_Starting with the front door

Lecture 50: 052_Starting with the door part 2

Lecture 51: 053_Modeling the front door part 3

Lecture 52: 054_Modeling the Handle and the door hinges bases

Lecture 53: 055_Creating and editing the door hinges

Lecture 54: 056_Creating the door handle

Lecture 55: 057_Modeling the door lock and the handle pad

Lecture 56: 058_Focusing on the back side of the cabin

Lecture 57: 059_Modeling the rear windshield frame

Lecture 58: 060_Creating the rear windshield rubber frame with the small middle window

Lecture 59: 061_Completing the rear side of the cabin

Lecture 60: 062_Starting with the rear left door

Lecture 61: 063_Fixing some shading issues and creating the door hinges bases

Lecture 62: 064_Finishing the doors

Lecture 63: 065_Starting with the roof

Lecture 64: 066_Starting with the roof part 2

Lecture 65: 067_Adding Bevel to the sharp edges and creating the top panels

Lecture 66: 068_Adding panels for the front side of the roof

Lecture 67: 069_Creating the front door glass and the rubber frame

Lecture 68: 070_Creating the Back driver side door's glass and rubber frame

Lecture 69: 071_Starting with the truck bed

Lecture 70: 072_Starting with the truck bed part 1

Lecture 71: 073_Adding a bevel modifier to the truck bed and fix all the shading issues

Lecture 72: 074_Starting with the rear fender

Lecture 73: 075_Starting with the rear fender part 2

Lecture 74: 076_Starting with truck bed door

Lecture 75: 077_Creating the truck bed door handle

Lecture 76: 078_Starting with the rear bumper part 1

Lecture 77: 079_Modeling the rear bumper part 2

Lecture 78: 080_Creating the foot step of the rear bumper

Lecture 79: 081_Creating the foot step pattern

Lecture 80: 082_Modeling the rear bumper hook

Lecture 81: 083_Creating the tail light and the license light cover for the rear bumper

Lecture 82: 084_Creating the rear fender tail and the bumper Parking Assist Sensor

Lecture 83: 085_Modeling the trailer plug part 1

Lecture 84: 086_Creating the trailer plug part 2

Lecture 85: 087_Starting with the tail light

Lecture 86: 088_Adding more details for the tail light

Lecture 87: 089_Finishing the tail light

Lecture 88: 090_Starting with the bed interior

Lecture 89: 091_Modeling the bed interior part 2

Lecture 90: 092_Making some tweaks for the bed and creating bed rail cover plastic

Lecture 91: 093_Truck bed tweaking part 2

Lecture 92: 094_Truck bed tweaking part 3

Lecture 93: 095_Adding new panel at the end of the bed floor

Lecture 94: 096_Blocking the left side of the bed

Lecture 95: 097_Completing the left side of the truck bed

Lecture 96: 098_Finishing the left side of the truck bed