MikroTik Internetworking Engineer with LABS

MikroTik Internetworking Engineer with LABS, available at $74.99, has an average rating of 4.88, with 66 lectures, based on 161 reviews, and has 1211 subscribers.

You will learn about Understand what is BGP routing protocol and where it is used Understand what is the function on the Autonomous system Understand how prefixes are being advertised in the internet Understand how to configure eBGP neighboship Understand how to configure eBGP Authentication using TCP MD5 Key Understand where eBGP multihop should be used Understand why iBGP should be configured on routers within the same AS Understand what is the function of split horizon in iBGP Understand what are the 4 BGP messages and the function of each of them Understand what are the BGP states Understand what is the BGP Route Path Selection Understand what are the Attributes that are used in MikroTik for BGP Understand how to configure BGP Weight Attribute on MikroTik Understand how to configure BGP Local Preferece Attribute on MikroTik Understand how to configure BGP AS Path Preprending Attribute on MikroTik Understand how BGP Origin code Attribute works on MikroTik Understand how to configure MED Attribute on MikroTik Understand how to remove Private AS Understand how to configure BGP in a single homed stub network Configuring BGP Mutihomed stub network for ISP's failover Configuring BGP Mutihomed non-stub network Configuring Failover and Load-Balancing on BGP Mutihomed non-stub network Usage of Route Filter to accept and discard advertised prefixes the way in and out Understand what BGP Community is Configure BGP community with AS Prepend Path Understand the well-known BGP communities and difference between no export and no advertise Configure no export BGP Community Configure no advertise BGP Community Understand what BGP aggregate can do Configure BGP aggregate w/o Inherit Attributes Understand what is BGP Route Reflector Configure BGP Route Reflector inside an AS to reduce number of iBGP peers Understand what is BGP Confederation Configure BGP Route Confederation inside an AS to reduce number of iBGP peers Understand what is MPLS and where to use it Understand how to have a BGP free core in your ISP using MPLS Understand the MPLS acronyms ((CE, PE, P, Label Push, Label Swap, Label Pop) Configure MPLS using the static labeling Configure MPLS using the dynamic labeling Filter MPLS using Accept and Advertise Filter Understand and configure VRF lite on MikroTik Understand MPLS layer 3 VPN using VRF Configure MPLS layer 3 VPN using VRF Understand and configure MPLS layer 2 VPN using VPLS Understand what is MPLS Traffic Engineering Configure MPLS Traffic Engineering Run VPLS over TE Tunnels This course is ideal for individuals who are Engineers and students who wants to learn how to configure BGP routing protocol on MikroTik routers or Engineers who work in Internet Service Provider using MikroTik Routers and want to deploy MPLS or Students who want to be prepared for the MikroTik MTCINE exam It is particularly useful for Engineers and students who wants to learn how to configure BGP routing protocol on MikroTik routers or Engineers who work in Internet Service Provider using MikroTik Routers and want to deploy MPLS or Students who want to be prepared for the MikroTik MTCINE exam.

Enroll now: MikroTik Internetworking Engineer with LABS

Summary

Title: MikroTik Internetworking Engineer with LABS

Price: $74.99

Average Rating: 4.88

Number of Lectures: 66

Number of Published Lectures: 66

Number of Curriculum Items: 66

Number of Published Curriculum Objects: 66

Original Price: $27.99

Quality Status: approved

Status: Live

What You Will Learn

Understand what is BGP routing protocol and where it is used
Understand what is the function on the Autonomous system
Understand how prefixes are being advertised in the internet
Understand how to configure eBGP neighboship
Understand how to configure eBGP Authentication using TCP MD5 Key
Understand where eBGP multihop should be used
Understand why iBGP should be configured on routers within the same AS
Understand what is the function of split horizon in iBGP
Understand what are the 4 BGP messages and the function of each of them
Understand what are the BGP states
Understand what is the BGP Route Path Selection
Understand what are the Attributes that are used in MikroTik for BGP
Understand how to configure BGP Weight Attribute on MikroTik
Understand how to configure BGP Local Preferece Attribute on MikroTik
Understand how to configure BGP AS Path Preprending Attribute on MikroTik
Understand how BGP Origin code Attribute works on MikroTik
Understand how to configure MED Attribute on MikroTik
Understand how to remove Private AS
Understand how to configure BGP in a single homed stub network
Configuring BGP Mutihomed stub network for ISP's failover
Configuring BGP Mutihomed non-stub network
Configuring Failover and Load-Balancing on BGP Mutihomed non-stub network
Usage of Route Filter to accept and discard advertised prefixes the way in and out
Understand what BGP Community is
Configure BGP community with AS Prepend Path
Understand the well-known BGP communities and difference between no export and no advertise
Configure no export BGP Community
Configure no advertise BGP Community
Understand what BGP aggregate can do
Configure BGP aggregate w/o Inherit Attributes
Understand what is BGP Route Reflector
Configure BGP Route Reflector inside an AS to reduce number of iBGP peers
Understand what is BGP Confederation
Configure BGP Route Confederation inside an AS to reduce number of iBGP peers
Understand what is MPLS and where to use it
Understand how to have a BGP free core in your ISP using MPLS
Understand the MPLS acronyms ((CE, PE, P, Label Push, Label Swap, Label Pop)
Configure MPLS using the static labeling
Configure MPLS using the dynamic labeling
Filter MPLS using Accept and Advertise Filter
Understand and configure VRF lite on MikroTik
Understand MPLS layer 3 VPN using VRF
Configure MPLS layer 3 VPN using VRF
Understand and configure MPLS layer 2 VPN using VPLS
Understand what is MPLS Traffic Engineering
Configure MPLS Traffic Engineering
Run VPLS over TE Tunnels

Who Should Attend

Engineers and students who wants to learn how to configure BGP routing protocol on MikroTik routers
Engineers who work in Internet Service Provider using MikroTik Routers and want to deploy MPLS
Students who want to be prepared for the MikroTik MTCINE exam

Target Audiences

Engineers and students who wants to learn how to configure BGP routing protocol on MikroTik routers
Engineers who work in Internet Service Provider using MikroTik Routers and want to deploy MPLS
Students who want to be prepared for the MikroTik MTCINE exam

***This course isnotofficially sponsored by MikroTik and not an authorized course by MikroTik. We are neither affiliated with nor endorsed by MikroTik. We respect the Trademarks of the mentioned company and institution.***

MikroTik MTCINE is the hardest and the more complex course track in MikroTik. Actually it is the one and only advanced course between all MikroTik courses and it requires as a pre-requisite the MTCNA course as well as MTCRE course.

As being a complex course, I have decided to design this course in which I explain all topics of the MTCINE track. In this course, I will explain and do LABS about the Border Gateway Protocol (BGP) and Multiple Protocol Label Switching (MPLS)which are both considered very advanced topics and implemented inside the networks of the Internet Service Provider (ISP).

So in this course, I will cover the following topics:

• What is Autonomous System (AS)

• What is Border Gateway Protocol (BGP)?

• Path Vector algorithm

• BGP Transport and packet types

• iBGP and eBGP

• Stub network scenarios and private AS removal

• Non-stub scenarios

• iBGP and eBGP multi-hop and loopback usage

• Route distribution and routing filters

• BGP best path selection algorithm

• BGP prefix attributes and their usage

• BGP route reflectors and confederations

• MPLS basics

• Static label mapping

• Label Distribution Protocol (LDP)

• Penultimate-hop-popping

• MPLS traceroute differences

• LDP based VPLS tunnels

• Bridge split horizon

• BGP based VPLS

• BGP based layer3 tunnels (L3VPN)

• What is traffic engineering and how it works

• RSVP, static path, dynamic path (CSPF)

• Bandwidth allocation and bandwidth limitation differences and settings

All my courses will be based on LABS, so I advice you to run GNS3 with MikroTik CHR image to be able to follow this course because in some LABS you require to run 7 MikroTik Routers in 1 LAB.

Finally, if you want to master the topics of the MTCINE track, I advise you to enroll in my course and I will help you with your mission.

Course Curriculum

Chapter 1: Introduction to BGP

Lecture 1: Why we need BGP – Intro

Lecture 2: Why we need BGP – Explanation

Lecture 3: Autonomous system and BGP prefixes

Chapter 2: Neighborship on BGP

Lecture 1: Introduction to BGP Neighborship

Lecture 2: LAB 1 – Configuring External BGP neighborship

Lecture 3: LAB 2 – Configuring eBGP Authentication using TCP MD5 key

Lecture 4: LAB 3 – Configuring EBGP Multihop

Lecture 5: LAB 4 – Configuring eBGP multihop with update source

Lecture 6: LAB 5- Configuring iBGP – Part 1

Lecture 7: Continued – LAB 5- Configuring iBGP – Part 1

Lecture 8: LAB6 – Configuring iBGP – Part 2

Lecture 9: LAB7 – iBGP Split Horizon

Chapter 3: MikroTik BGP Messages and BGP Neighbor states

Lecture 1: Intro – BGP messages and BGP neighborship states

Lecture 2: LAB 8 – Understand the BGP Messages OPEN, UPDATE, KEEPALIVE & NOTIFICATION

Lecture 3: BGP States: Idle – Connect – Active – OpenSent – OpenConfirm – Established

Chapter 4: MikroTik BGP Path Selection & Attributes

Lecture 1: Intro – BGP Route Selection and Attributes

Lecture 2: MikroTik BGP Route Path Selection and Attributes Explained

Lecture 3: LAB 9 – Configuring BGP Weight Attribute

Lecture 4: LAB 10 – BGP Local Preference Attribute Part1

Lecture 5: LAB 10 – BGP Local Preference Attribute Part2

Lecture 6: LAB 11 – BGP AS Path Prepending Attribute

Lecture 7: LAB 12 – BGP Origin Code Attribute

Lecture 8: LAB 13 – BGP MED Attribute

Chapter 5: BGP Single Homed Stub Network

Lecture 1: Configure BGP Single Homed Stub Network – Part 1

Lecture 2: Configure BGP Single Homed Stub Network – Part 2

Chapter 6: BGP Multihomed Stub Network

Lecture 1: What is BGP Multihomed Stub Network?

Lecture 2: Configure BGP Multihomed Stub Network for ISPs Failover

Chapter 7: BGP Multihomed for non-Stub Network

Lecture 1: What is BGP Multihomed for non-Stub Network?

Lecture 2: LAB scenario – Explanation

Lecture 3: Configure BGP Multihomed non-Stub Network – Part1

Lecture 4: Configure BGP Multihomed non-Stub Network – Part2

Lecture 5: Configuring Load Balancing and Failover on BGP using Route Filters

Lecture 6: Testing Load Balancing & Failover on BGP Multihomed non-stub network

Chapter 8: BGP Communities

Lecture 1: Introduction to BGP Communities

Lecture 2: Configuring BGP Community with Prepend Path

Lecture 3: BGP Well-Known Community (No Export – No Advertise)

Chapter 9: BGP Aggregate

Lecture 1: Introduction to BGP Aggregate

Lecture 2: Configure BGP aggregate w/o Inherit Attributes

Chapter 10: BGP Route Refelector

Lecture 1: Introduction to BGP Route Reflector

Lecture 2: What is BGP Route Reflector and where can be used?

Lecture 3: Configure BGP Route Reflector to propagate prefixes between non iBGP peers

Chapter 11: BGP Confederation

Lecture 1: Introduction to BGP Confederation

Lecture 2: What is BGP Confederation and where to use it?

Lecture 3: Configuring BGP Confederation

Chapter 12: Introduction to MPLS

Lecture 1: Intro to MPLS Fundamental

Lecture 2: Where and how to use MPLS?

Lecture 3: BGP Free Core using GRE Tunnels

Lecture 4: BGP Free Core using MPLS

Chapter 13: MPLS Basics, MPLS Labels and MPLS Filtering

Lecture 1: Introduction to MPLS Basics and MPLS Labels

Lecture 2: MPLS header and acronyms (CE, PE, P, Label Push, Label Swap, Label Pop)

Lecture 3: Configuring MPLS with Static Labels

Lecture 4: Configuring MPLS with Dynamic Labels

Lecture 5: MPLS Filtering (Accept Filter vs Advertise Filter)

Chapter 14: MPLS Layer3 VPN – VRF

Lecture 1: Introduction to L3 VPN on MPLS

Lecture 2: Configuring VRF Lite on MikroTik

Lecture 3: MPLS Layer 3 VPN – Explained

Lecture 4: MPLS Layer 3 VPN – Configuration (Part 1)

Lecture 5: MPLS Layer 3 VPN – Configuration (Part 2)

Chapter 15: MPLS Layer 2 VPN – VPLS

Lecture 1: Introduction to MPLS Layer 2 VPN

Lecture 2: MPLS Layer 2 VPN (VPLS) – Configuration

Chapter 16: MPLS Traffic Engineering

Lecture 1: Introduction to MPLS Traffic Engineering

Lecture 2: MPLS Traffic Engineering – Explained

Lecture 3: MPLS Traffic Engineering – LAB Scenario

Lecture 4: MPLS Traffic Engineering – Configuration

Lecture 5: VPLS over TE tunnels

Lecture 6: MikroTik official trainings with Maher Haddad

Instructors

Maher Haddad
IT instructor

Rating Distribution

1 stars: 0 votes
2 stars: 1 votes
3 stars: 6 votes
4 stars: 38 votes
5 stars: 116 votes

Frequently Asked Questions

How long do I have access to the course materials?

You can view and review the lecture materials indefinitely, like an on-demand channel.

Can I take my courses with me wherever I go?

Definitely! If you have an internet connection, courses on Udemy are available on any device at any time. If you don’t have an internet connection, some instructors also let their students download course lectures. That’s up to the instructor though, so make sure you get on their good side!

Menu