Local Interconnect Network (LIN) Bus Master/Slave/Sniffer

Local Interconnect Network (LIN) Bus Master/Slave/Sniffer, available at $49.99, has an average rating of 3.9, with 16 lectures, based on 12 reviews, and has 44 subscribers.

You will learn about Learn the basic LIN (Local Interconnect Network) basics from an implementation point of view. Exposure to the Arduino Integrated Development Enviroment (IDE) Program both the Arduino based Teensy 4.0 and XIAO ESP32C3 modules for act as a LIN Master and Slave/Sniffer Learn to build LIN prototyping hardware using breadboard. This course is ideal for individuals who are This course is for embedded software engineers, electrical engineers, and students exploring a career in the embedded software area. It is particularly useful for This course is for embedded software engineers, electrical engineers, and students exploring a career in the embedded software area.

Enroll now: Local Interconnect Network (LIN) Bus Master/Slave/Sniffer

Summary

Title: Local Interconnect Network (LIN) Bus Master/Slave/Sniffer

Price: $49.99

Average Rating: 3.9

Number of Lectures: 16

Number of Published Lectures: 16

Number of Curriculum Items: 16

Number of Published Curriculum Objects: 16

Original Price: $24.99

Quality Status: approved

Status: Live

What You Will Learn

Learn the basic LIN (Local Interconnect Network) basics from an implementation point of view.
Exposure to the Arduino Integrated Development Enviroment (IDE)
Program both the Arduino based Teensy 4.0 and XIAO ESP32C3 modules for act as a LIN Master and Slave/Sniffer
Learn to build LIN prototyping hardware using breadboard.

Who Should Attend

This course is for embedded software engineers, electrical engineers, and students exploring a career in the embedded software area.

Target Audiences

This course is for embedded software engineers, electrical engineers, and students exploring a career in the embedded software area.

The Emicros Instructional Series on “Building A Local Interconnect Network (LIN) Project From Hardware to Software” exposes the student to basic LIN principles generating a break signal for the Master to responding to the break signal by the Slave/Sniffer. The sync character is next followed by the payload. The protected ID generation is discussed and coded as well as the checksum for both LIN 1.x and 2.x specification. The hardware for sending and receiving LIN frames as a LIN Master or Slave/Sniffer using the Arduino based Teensy 4.0 and/or Seeed Development XIAO ESP32C3 modules. Software is written in C and compiled using the FREE Arduino IDE.

In the hardware section the schematic used for building the hardware is shown and then the hardware is built using a breadboard. Two versions for both the Teensy 4.0 and the XIAO ESP32C are developed. The LIN interface IC is the MCP2003 or MCP2004. Note the XIAO ESP32C3 can be purchased for around $5.

The software starts with setting up the FREE Arduino IDE writing the software in C. The break signal is developed first then the sync byte and the LIN payload. The checksum is shown and then both Master and Slave/Sniffer software is produced.

This course is for anyone with basic electronic hardware and software knowledge and having the motivation to learn more embedded hardware and software techniques.

Course Curriculum

Chapter 1: Introduction

Lecture 1: Introduction

Chapter 2: Building The Hardware

Lecture 1: Building The Hardware

Chapter 3: Installing the Development Enviroment

Lecture 1: Installing The Development Enviroment

Lecture 2: ESP32C3 Software

Chapter 4: Building And Programming a LIN Master (Transmitter)

Lecture 1: LIN Master – Introduction

Lecture 2: LIN Master – Setup

Lecture 3: LIN Master – Generate Break & Sync

Lecture 4: LIN Master – Protected ID

Lecture 5: LIN Master – loop()

Lecture 6: LIN Master – Send Frame

Lecture 7: LIN Master – Teensy Code

Lecture 8: LIN Master – Read Frame

Lecture 9: LIN Master – XIAO ESP32C3 Master

Chapter 5: LIN Slave & Sniffer

Lecture 1: LIN Slave & Sniffer – The Code

Lecture 2: LIN Slave & Sniffer – XIAO ESP32C3 Version

Chapter 6: Final

Lecture 1: Where to get updates

Instructors

Ron Russ
Embedded Software Engineer Instructing at Udemy

Rating Distribution

1 stars: 0 votes
2 stars: 2 votes
3 stars: 3 votes
4 stars: 2 votes
5 stars: 5 votes

Frequently Asked Questions

How long do I have access to the course materials?

You can view and review the lecture materials indefinitely, like an on-demand channel.

Can I take my courses with me wherever I go?

Definitely! If you have an internet connection, courses on Udemy are available on any device at any time. If you don’t have an internet connection, some instructors also let their students download course lectures. That’s up to the instructor though, so make sure you get on their good side!

Menu