Siemens NX CAD/CAM&Post Builder/Mold (CAM 2027 Interface)
Siemens NX CAD/CAM&Post Builder/Mold (CAM 2027 Interface), available at $64.99, has an average rating of 4.45, with 130 lectures, based on 141 reviews, and has 1492 subscribers.
You will learn about You will learn how to make 3D Parts. After this course, you will be able to create G code for Milling, Turning and Wire EDM operations (3 Axis & Multi Axis). Additional NX CAM 2027 Interface sessions added to the course to be able to use the latest version. You will be professional user in NX CAM. You will learn the steps of NX Injection Mold (From start to the End). You will be able to use NX CAD for Assembly & Drafting. This course is ideal for individuals who are CAD Engineers or CAD Designer or NX Users or CAD CAM Persons or Mechanical Engineers, Technicians, Drafters or Injection Mold Engineers or Manufacturing Engineers It is particularly useful for CAD Engineers or CAD Designer or NX Users or CAD CAM Persons or Mechanical Engineers, Technicians, Drafters or Injection Mold Engineers or Manufacturing Engineers.
Enroll now: Siemens NX CAD/CAM&Post Builder/Mold (CAM 2027 Interface)
Summary
Title: Siemens NX CAD/CAM&Post Builder/Mold (CAM 2027 Interface)
Price: $64.99
Average Rating: 4.45
Number of Lectures: 130
Number of Published Lectures: 130
Number of Curriculum Items: 130
Number of Published Curriculum Objects: 130
Original Price: $99.99
Quality Status: approved
Status: Live
What You Will Learn
- You will learn how to make 3D Parts.
- After this course, you will be able to create G code for Milling, Turning and Wire EDM operations (3 Axis & Multi Axis).
- Additional NX CAM 2027 Interface sessions added to the course to be able to use the latest version.
- You will be professional user in NX CAM.
- You will learn the steps of NX Injection Mold (From start to the End).
- You will be able to use NX CAD for Assembly & Drafting.
Who Should Attend
- CAD Engineers
- CAD Designer
- NX Users
- CAD CAM Persons
- Mechanical Engineers, Technicians, Drafters
- Injection Mold Engineers
- Manufacturing Engineers
Target Audiences
- CAD Engineers
- CAD Designer
- NX Users
- CAD CAM Persons
- Mechanical Engineers, Technicians, Drafters
- Injection Mold Engineers
- Manufacturing Engineers
Sample From reviews:
-
Thanks Sir..(Rating 5❤)
-
Very Good Courses(Rating 5❤)
-
Best course I’ve found so far, it’s clear, simple and straight to the point.(Rating 5❤)
-
Good (Rating 5❤)
-
Dear sir, You are a legend. I am interested in learning your subject. Thank you so much!!! (Rating 5❤)
-
Courses are very useful, Thanks Sir, hope to continue in all CAD CAM programs with the same way of explanation (Rating 5❤)
-
Thank u, Nice Course, Thanks for your effort (Rating 5❤)
-
Thanks, Nice Course (Rating 5❤)
-
Very nice courses, Thanks (Rating 5❤)
-
Thank you Sir (Rating 5❤)
-
Very good courses, and nice experience (Rating 5❤)
-
nice!!!! (Rating 5❤)
-
GREAT Course! Thank you so much!(Rating 5❤)
-
Good Experience(Rating 5❤)
-
The best cad cam course(Rating 5❤)
-
Good CAM Course(Rating 5❤)
-
Best CAD CAM course(Rating 5❤)
-
Nicee(Rating 5❤)
Course Main Contents (5 Courses!):
-
Course 1: NX CAD (Modelling – Assembly – Drafting)
-
Course 2: NX Sheet Metal
-
Course 3: NX CAM (Milling – Turning – Wire EDM) + NX 2027 CAM Interface
-
Course 4: NX Post Builder
-
Course 5: NX Mold Wizard
NX Package Contents:
NX CAD Sketching
NX CAD Sketching Exercises
NX CAD Modelling
NX CAD Modelling Exercises
NX Synchronous Modelling
NX Surface Creation
NX CAD Assembly & Drafting
NX Sheet Metal
NX Sheet Metal Exercises
NX CAM Milling (3Axis)
NX CAM Milling Multi Axis (4,5 Axis)
NX CAM Turning
NX CAM Drilling (3 Axis & Multi Axis)
NX CAM Wire EDM
NX CAM Millturn
NX Post Builder (3 Axis & Multi Axis)
NX Injection Mold (From start to the End)
NX 2027 CAM Interface (New Additional Sessions)
Description
-
After this course, you will be able to use the NX CAD / CAM & Post Builder to do Modelling & Machining for any Part and to use NX CAM with any CNC Machines.
-
After this course, you will be able to create G code for Milling, Turning and Wire EDM operations (3 Axis & Multi Axis).
-
You will be professional user in NX CAM.
-
Introduction to the components of the Mold
-
Mold Wizard is a collection of tools that assist you by automating common
mold design tasks.
-
You will learn the steps of NX Injection Mold (From start to the End)
-
You will be able to use NX CAD for Assembly & Drafting
-
After this course, you will be able to use the NX Mold Wizard to do any injection mold part.
-
Additional NX CAM 2027 Interface sessions added to the course to be able to use the latest version.
Notes:
-
You will download all parts that we used during the course and more parts for practice.
-
The implementation of this course is in NX 11 but you will be able to implement using any version.
-
Additional NX CAM 2027 Interface sessions added to the course to be able to use the latest version.
-
You will have full technical support with me.
-
Weekly additional Exercise will be added to the course according to students requirements (If Required).
Course Curriculum
Chapter 1: Introduction
Lecture 1: Introduction
Lecture 2: NX Interface and Concept
Chapter 2: Sketching
Lecture 1: NX Sketch 1
Lecture 2: NX Sketch 2
Lecture 3: NX Sketch Constrains
Lecture 4: NX Sketch Ex
Chapter 3: Modelling
Lecture 1: NX Extrude 1
Lecture 2: NX Extrude 2 and Revolve
Lecture 3: NX Extrude Ex
Lecture 4: NX Revolve Ex
Lecture 5: NX Edge Blend, Draft, Shell, Trim Body, Chamfer, Hole
Lecture 6: NX Exercise 1 Modeling
Lecture 7: Emboss, Emboss Body, Extract Geometry
Lecture 8: Emboss, Emboss Body, Offset Emboss, Groove
Lecture 9: Trim Sheet, Split body, Trim and Extend, Extend Sheet, Divide face, Delete Body
Lecture 10: Offset Face, Offset Surface, Variable Offset, Thicken, Bounding body, Scale Body
Lecture 11: Project curve, Offset Curve, Offset Curve on face
Lecture 12: Intersection Curve, Bridge Curve, Ispparametric Curve, Helix, Tube, Swept
Lecture 13: Isoparametric Curve, Combined Projection, Curve on surface
Lecture 14: Extract Virtual curve, Isocline Curve
Lecture 15: Sweep Features
Lecture 16: Additional Features – Dart, Block, Sphere, Cyl, Cone
Lecture 17: Modeling Exercise 1
Lecture 18: Modeling Exercise 2
Lecture 19: Modeling Exercise 3
Lecture 20: Modeling Exercise 4
Lecture 21: Modeling Exercise 5
Chapter 4: Surface Creation Basics
Lecture 1: Surface Through Curves
Lecture 2: Surface Through Curves Mesh
Lecture 3: Studio Surface, Fill Surface
Lecture 4: Law Extension, Extension
Lecture 5: Law Extension, Silhouette Flange
Lecture 6: N-Sided Surface
Lecture 7: Four Points Surface, Surface Through Points
Chapter 5: Synchronous Modelling
Lecture 1: Synchronous Modelling
Chapter 6: Assembly & Drafting Overview
Lecture 1: Assembly 1
Lecture 2: Assembly 2
Lecture 3: Assembly 3
Lecture 4: Drafting Overview
Lecture 5: Drafting Title Block
Chapter 7: NX CAM & Post Builder
Lecture 1: NX CAM & Post Builder Introduction
Lecture 2: CAM General Steps (3 Axis Rough & Finish Operations)
Chapter 8: Milling 3 Axis Operations (Roughing & Finishing)
Lecture 1: 3 Axis Rough Operations (Plunge Milling)
Lecture 2: 3 Axis Rough Operations (Corner Rough)
Lecture 3: 3 Axis Planar operation and Planar with IBW
Lecture 4: 3 Axis Face Milling operation and Face Milling Manual
Lecture 5: 3 Axis Finish Operations (Z Level Profile)
Lecture 6: 3 Axis Finish Operations (Z Level Corner Finish)
Lecture 7: 3 Axis Finish Operations (More Operations)
Lecture 8: 3 Axis Finish Operations (Another Example)
Lecture 9: 3 Axis Finish Operations (Another Example)
Chapter 9: Milling Multi Axis Operations & Machine Simulation
Lecture 1: Multi axis Finish Operations (Streamline operation)
Lecture 2: Multi axis Finish Operations (Tool Axis Control-1)
Lecture 3: Multi axis Finish Operations (Tool Axis Control-2)
Lecture 4: Multi axis Finish Operations (Tool Axis Control-3)
Lecture 5: Multi axis Finish Operations (Tool Axis Control-4)
Lecture 6: Multi axis Finish Operations (Tool Axis Control-5)
Lecture 7: Multi axis Finish Operations (Z Level 5 Axis Operation 1)
Lecture 8: Multi axis Finish Operations (Z Level 5 Axis Operation 2)
Lecture 9: Multi 4 axis Finish Operations (Streamline operation) with Machine Simulation
Chapter 10: Drilling & Wire EDM Operations
Lecture 1: Drilling Operations
Lecture 2: Wire EDM Operation
Chapter 11: Cutting Parameters & Non-Cutting Moves
Lecture 1: Cutting Parameters & Non-Cutting Moves part 1-2
Lecture 2: Cutting Parameters & Non-Cutting Moves part 2-2
Chapter 12: Blank & Tool Creation and Cut levels option
Lecture 1: Cut Levels
Lecture 2: Cut Levels Ranges
Lecture 3: Blank & Tool Creation
Chapter 13: Turning Operations Basics
Lecture 1: Turning Operations 1
Lecture 2: Turning Operations 2
Chapter 14: Post Builder Basics
Lecture 1: Post Builder 3 Axis Milling
Lecture 2: Post Builder Multi Axis Milling
Lecture 3: Post Builder Fanuc Example
Chapter 15: NX CAM Projects
Lecture 1: Project 1 Milling 3 Axis
Lecture 2: Project 2 Milling Multi Axis
Lecture 3: Project 3 Turning Operations
Lecture 4: Project 4 Drilling Operations
Lecture 5: Project 5 Feature Based Machining
Lecture 6: Project 6 General Milling & Drilling Operations
Lecture 7: Project 7 – Multi Blade operations
Lecture 8: Project 8 Milling Multi Axis with different Tool Axis positions
Lecture 9: Project 9 Hole Milling & Thread Milling
Lecture 10: Project 10 Groove Milling
Lecture 11: Project 11 Millturn Operations
Lecture 12: Project 12 Milling 3 Axis & Indexing
Chapter 16: NX CAM 2027 (Latest Version) Interface
Instructors
-
Mohamed Gamal
BIM Project Manager & CAD CAM Specialist
Rating Distribution
- 1 stars: 1 votes
- 2 stars: 2 votes
- 3 stars: 7 votes
- 4 stars: 18 votes
- 5 stars: 113 votes
Frequently Asked Questions
How long do I have access to the course materials?
You can view and review the lecture materials indefinitely, like an on-demand channel.
Can I take my courses with me wherever I go?
Definitely! If you have an internet connection, courses on Udemy are available on any device at any time. If you don’t have an internet connection, some instructors also let their students download course lectures. That’s up to the instructor though, so make sure you get on their good side!
You may also like
- Top 10 Video Editing Courses to Learn in November 2024
- Top 10 Music Production Courses to Learn in November 2024
- Top 10 Animation Courses to Learn in November 2024
- Top 10 Digital Illustration Courses to Learn in November 2024
- Top 10 Renewable Energy Courses to Learn in November 2024
- Top 10 Sustainable Living Courses to Learn in November 2024
- Top 10 Ethical AI Courses to Learn in November 2024
- Top 10 Cybersecurity Fundamentals Courses to Learn in November 2024
- Top 10 Smart Home Technology Courses to Learn in November 2024
- Top 10 Holistic Health Courses to Learn in November 2024
- Top 10 Nutrition And Diet Planning Courses to Learn in November 2024
- Top 10 Yoga Instruction Courses to Learn in November 2024
- Top 10 Stress Management Courses to Learn in November 2024
- Top 10 Mindfulness Meditation Courses to Learn in November 2024
- Top 10 Life Coaching Courses to Learn in November 2024
- Top 10 Career Development Courses to Learn in November 2024
- Top 10 Relationship Building Courses to Learn in November 2024
- Top 10 Parenting Skills Courses to Learn in November 2024
- Top 10 Home Improvement Courses to Learn in November 2024
- Top 10 Gardening Courses to Learn in November 2024